How to build swing set for your children? When I was looking for information about how to build swing set I found this article written by John Grand. I hope this will help you.
What you will need:
You will need a shovel, a saw, a drill, a ratchet and a hammer. The other required materials are water, sand, cement, screws, bolts, swing, post anchor, sandpaper, 2x4-inch stock, and 2x10-inch stock.
5 steps how to build swing set:
1. Select the right location.
2. Build its foundation.
3. Cut the wood.
4. Assembling the swing set.
5. Finishing touches.
1. When selecting a good location for a swing set, it must be placed somewhere safe and stable, making sure that everyone who uses it can get out of it safe and unharmed. At the same time, the soil where the swing set stands must be solid ground.
2. When building holes on the ground as foundations, each hold must be at least an inch in diameter and four inches deep. In places where the weather is really deep, make sure that the holes are dug deeper than the frost line. Place the concrete tubes into the holes, and then pour in the cement to solidify the foundations. On top of the drying cement, place an anchor in preparation for the next step of the process.
3. Take four pieces of the 2x4-inch stocks then cut and round their ends. Miter one end of the stocks to the 2x10-inch upper beam and the opposite end to the anchors of the foundations. To create a mid-point attachment to the leg boards, cut boards horizontally then connect them together.
4. In assembling the boards, place a couple of leg boards into a clamp and then drill holes at the middle of the leg boards. Create a funnel-shaped enlargement at the outer end of a drilled hole. Create eyebolt holes at the top portion of the beam, and then put together the top board, horizontal support boards, and leg boards. When all the components are completed, fasten them to the foundation.
5. Now that the swing set is almost done, examine the project all throughout and look for certain imperfections. Use sandpaper to remove splinters and rough spots that can be harmful for the users. As a finishing touch, paint all the wood components of the swing set. As a precaution, the wood must be primed before painting it with any oil-based material. At the same time, it is much better not to use lead-based paint on this project.
Article Source: http://EzineArticles.com/?expert=John_Grant
If you find building of the wooden play swing set too difficult then you can buy one here. No worry, I bought it as well.
How to entertain kids
Wooden Play Swing Set
Einstein Baby Jumper
Baby Einstein Musical Motion Jumper
Baby Activity Jumper
Baby Jolly Jumpers
Travel Baby Carrier
Žádné komentáře:
Okomentovat